Elsema PCR43301240RE Receiver with Enclosure
Elsema PCR43301240RE Receiver with Enclosure
This is a low demand item - Stock will need to be sourced from Australian suppliers to fulfil your order. Please allow additional time for dispatch. Contact us for ETA Prior to ordering if required urgently.
Couldn't load pickup availability
Elsema PCR43301240RE - Penta 1 Channel Receiver 240V with Voltage Free Charge Relay Output and Enclosure
The Elsema PCR43301240RE is a genuine Elsema 240V 433MHz single channel receiver supplied inside a weather-resistant enclosure. Designed for residential, commercial and industrial automation, it provides reliable wireless control of automatic gates, garage doors, boom gates, lighting systems, pumps and access control equipment. Compatible with both Elsema PentaFOB® and PentaCODE® remotes, it combines encrypted security, long-range performance and flexible voltage-free relay switching in one compact solution.
What’s Included:
- 1 × Elsema PCR43301240RE 1 Channel Receiver with Enclosure (240V AC)
- 1 × Comprehensive installation and programming guide
Key Features:
- Genuine Elsema Receiver
- Fully Enclosed Design in Weather Resistant Outdoor Enclosure (IP66)
- 110–240VAC Mains Power
- Single Channel Voltage Free Relay Output
- Compatible with PentaFOB and PentaCODE Remotes
- LED Status Indicator
- Ideal for Gates, Garage Doors, Lighting and Access Control
- Designed for Australian Conditions
Compatible with:
- Elsema PentaFOB
- Elsema PentaFOB Waterproof
- Elsema PentaCODE
- Elsema PentaCODE Hardwired
- Elsema PentaFOB Hardwired
- Elsema Penta FOBSwitch
- Elsema PentaFOB Handheld
Not Compatible with:
- Elsema FMT
- Elsema KEY
- Elsema Gigalink
- Elsema MultiCode
Not sure which remote you would like to use? Check out our Comparison Blog Post Here
Ideal Applications:
- Automatic sliding or swing gate control
- Garage door automation
- Outdoor lighting control
- Industrial equipment and machinery activation
- Remote operation of access systems
Dimensions of PCR43301240R (receiver only):
Technical Specifications:
| Supply Voltage | 110 to 240 Volts AC Mains |
| Frequency Band | 433.10 to 433.70Mhz |
| Receiver Sensitivity | Better then 0.316uV (-117dBm) |
| Operating Temperature Range | -5 to 50 |
| Receiver Memory Storage | Unlimited Remotes |
| Decoding System | Encrypted 17 billion codes combinations or onboard 12-way code switch |
| Outputs | Voltage free charge over relay outputs, rated at 8 Amps at 240Volts AC |
| Relay Contacts | Common ( c ) Normally Closed (NC) and Normally Open (NO) |
| Connections | Screw type terminal block |
| IP Rating | IP66 |
| Dimensions | 120 x 80 x 75mm |
| Weight | 330grams |
| Useable Transmitters | PentaFOB and PentaCODE |
| Warranty | 12 Months Manufacturers Warranty |
Downloads:
Frequently Asked Questions:
What is the difference between the PCR43301240R and the PCR43301240RE?
| PCR43301240R | PCR43301240RE |
 |
 |
| Receiver Only | Receiver in weather-resistant enclosure |
| Fits inside existing control cabinet | Ready for outdoor installation |
| Lower cost | Better environmental protection |
Is this receiver powered by 240V?
Yes. The PCR43301240RE connects directly to a 110-240V AC mains supply.
Does this receiver output 240V?
No. The relay output is voltage free (dry contact), allowing it to switch many different control voltages depending on your installation.
What is a Voltage-Free Relay?
The PCR43301240RE provides a voltage-free (dry contact) relay output. While the receiver itself is powered by 110-240V AC mains, the relay contacts do not output voltage. Instead, they simply open or close a circuit, allowing the receiver to control equipment operating on 12V, 24V or 240V depending on your application.
Can I use PentaFOB remotes?
Yes.
Can I use PentaCODE remotes?
Yes.
Frequently Asked Questions
Is the remote pre-programmed or does it require setup before use?
Most remotes require programming to your opener before use. This process allows the remote to communicate securely with your specific garage or gate system.
If the product is listed as “compatible” rather than “genuine”, it will still need to be coded in the same way as your original remote.
Programming instructions are included with your order, and additional guides can be found on our Programming Instructions page or by contacting our support team for assistance.
How much does shipping cost?
Retail customers enjoy free standard shipping Australia-wide on orders over $10. Orders are sent as tracked parcels via a range of trusted couriers, including Australia Post, CouriersPlease, and Aramex.
For faster delivery, an Express Shipping option is available for $9.95.
International shipping rates vary depending on the destination — standard shipping starts from $20, and all options include tracking for your peace of mind.
Wholesale customers are charged a flat rate of $14.95 for all orders, with tracking provided once despatched.
How long will it take for the order to arrive?
For the East Coast of Australia, standard delivery typically takes 3–5 business days.
For the West Coast and Northern Territory, please allow 7–14 business days for standard delivery.
For more detailed information, please refer to our Shipping Policy.
What happens if I bought the wrong item?
If you think you have purchased the wrong item, please contact us and we will help start up the returns process and suggest correct replacement.
What happens if something is wrong with the remote?
Having Trouble Programming Your Remote?
Setting up your remote to your opener can sometimes be a little frustrating. If you’re having difficulty programming your remote, get in touch with us — our team is happy to help troubleshoot the issue.
All products are covered by a manufacturer’s warranty, which protects against any faults that may occur during the production process.
For more information about our warranty process, please refer to our Warranty Policy.