Merlin 2600P Upgrade Kit
Merlin 2600P Upgrade Kit
Couldn't load pickup availability
Merlin Powerlift 2600P Upgrade Kit – Remote Replacement Solution
The Merlin Powerlift 2600P Upgrade Kit is the ideal solution for restoring remote access to older Merlin Powerlift 2600P garage door openers where original remotes are no longer reliable, unavailable, or the built-in receiver has failed.
This upgrade kit replaces outdated receiver technology with a modern, secure system, allowing you to pair new remotes and regain full control of your garage door without replacing the entire opener.
This upgrade kit uses the Lexo Automation 400 Capacity Universal Receiver with Lexo Automation Compatible Remotes, providing a reliable and cost-effective remote replacement solution for older Merlin systems.
What's Included
- 1 x LEXO Automation 400 Capacity Receiver
- 3 x Pre-Programmed Lexo Automation Remotes
- 1 x Power Pack
- Wiring Leads for Direct Connection
- Wiring Instructions
Note: A spare power point is required within close proximity of the garage door opener.
Key Features
- Upgrade Obsolete Systems: Brings older Merlin 2600P openers back to life when built in receiver has failed.
- Pre-Wired for Easy Installation: Minimal wiring required - simply connect to the existing terminal points on your motor.
- Secure Modern Technology: Replaces outdated coding systems with reliable, interference-resistant operation.
- Large Remote Capacity: Pair up to 400 remotes to the receiver - ideal for larger households or complexes.
Compatible with
- This Upgrade Kit has been specifically created for the use on the Merlin 2600P Overhead Garage Door Openers.
Technical Specifications for Lexo Automation 400 Capacity Receiver.
| Frequency | 433.92Mhz |
| Code Type | Fixed & Rolling Code |
| Body Type | Receiver |
| Number of Channels | 2 |
| Enclosure | Enclosure (not IP rated) |
| Size | 90 x 60 x 20mm |
| Power Supply | 12 – 24 Volts AC or DC |
| Connection | Screw In Terminal Block |
| Range | Up to 40m |
| Warranty | 12 months Manufacturers Warranty |
Wiring Instructions:
This kit comes with pre-programmed 4-button remotes. The remotes will come programmed to button 1 unless requested otherwise. Full instructions will be supplied with your order for wiring into your opener.
This kit is supplied for DIY installation. You will need to connect the wires to the corresponding terminal points on your motor. Please note, access to these terminals may require working at height (e.g. using a ladder), so ensure appropriate safety precautions are taken.
This product contains a button or coin cell battery. To prevent possible SERIOUS INJURY or DEATH:
- Keep new and used batteries out of reach of children at all times.
- Do not use this product if the battery compartment is damaged or does not close securely.
- Dispose of used batteries immediately and safely — even flat batteries can cause serious harm.
- Do not ingest the battery. Chemical burn hazard.
- If you suspect a battery has been swallowed or inserted, act immediately — severe or fatal injuries can occur within 2 hours.