Genuine Solar Charge Card Replacement for ATA and B&D

ATA SCG-01 v2.01 Solar Charger Board – 4 Pin

Keep your ATA or B&D solar-powered garage or gate opener running efficiently with the ATA SCG-01 v2.01 Solar Charger Board. Designed as a genuine replacement part, this solar charge card ensures your battery remains charged and protected, providing reliable operation for your solar-powered automation system.

With a 4-pin orientation, this charger board is a direct replacement for existing ATA or B&D solar kits with the SCG-01 v2.01 code. It features a built-in self-protection system, preventing total battery discharge, which can damage your backup power source.

With free Australia-wide shipping* and a 2-year manufacturer’s warranty*, this genuine ATA solar charger board offers long-term durability, ensuring you never have to worry about power interruptions.

Key Features & Benefits

• Ensures Reliable Solar Charging – Maintains optimal battery charge for ATA & B&D solar-powered automation systems.
• Prevents Battery Over-Discharge – Includes a self-protection system to safeguard your solar battery from excessive depletion, extending its lifespan.
• Genuine ATA Replacement Part – Designed specifically for ATA and B&D solar kits with a 4-pin orientation, ensuring a perfect fit and seamless operation.
• Easy Installation – Comes with a charger board and wiring harness for simple plug-and-play replacement.
• Free Standard Shipping Australia-Wide* – No hidden costs—enjoy free delivery anywhere in Australia.
• 2-Year Manufacturer’s Warranty* – Peace of mind with genuine ATA warranty support.

Compatibility

The ATA SCG-01 v2.01 Solar Charger Board is compatible with ATA and B&D solar-powered garage and gate openers that use a 4-pin solar kit.

This genuine replacement charger board is essential for keeping your solar-powered automation system operating efficiently, ensuring that even in cloudy conditions, your battery remains fully charged and ready.

The Perfect Replacement for Your Solar Kit

The ATA Solar Charge Card is the ideal replacement for worn or faulty charger boards in ATA and B&D solar automation systems. Whether you’re running a solar-powered gate or garage door opener, this charger board ensures uninterrupted charging and long-term battery health.

Upgrade your solar automation system today with the ATA SCG-01 v2.01 Solar Charger Board – the essential charging solution for reliable performance!

N/A

Replacing your Charger Board

• Unplug the drive unit from mains power.
• Disengage motor using manual release cord.
• Remove the main cover, timing cover and light diffuser, then remove the transformer, EMC board and mains power cable.
• Fix the Charger Board  under the timing cover using four (4) M4x8 screws
• Feed the three wire cable attached to the Charger board through the opening, then connect the three wire harness (red/yellow/black) into the control board’s “SBC-02” 5 pin connector.
• Plug the solar shunt 5 onto the control board’s “J13” connector.

Connect the Solar Panel

• Feed the Solar Panel’s 1 cable through black grommet on the chassis
• Connect the red wire to the Charger Board’s 3 “SOLAR+” connector, and the black wire to the “-SOLAR” connector. WARNING! The opener will become active during the following steps.

Mount & Connect the Battery

• Drill a 16.0mm hole in the Battery Pack enclosure (recommend at the bottom) and fit nylon gland 9 .
• Mount the Battery Pack 2 using the mounting lugs 6 and screws 7 close to the opener.
• Feed the 2-core 18AWG gauge cable 8 through the Battery Box’s nylon gland 9 .
• Connect the red wire to the Battery Box’s “+” terminal, and the black wire to the “–” terminal
• Feed the other end of the 2-core 18AWG gauge cable 8 through the drive unit’s black grommet.
• Connect the red wire to the Charger Board’s 3 “BAT+” connector, and the black wire to the “–BAT” connector.
• Refit the timing cover, main cover and light diffuser.