Features:
- 4-button keyring remote with a compact, ergonomic design
- Advanced Security with 433.92MHz Rolling Code Technology, ensuring your garage door remains secure from unauthorised access
- Multi-Door Operation – Supports up to four different doors or gates
- LED Indicator – Provides visual feedback when a button is pressed
- Long-Lasting Battery Life – Pre-installed battery for immediate use
Compatibility:
This remote is specifically designed for the Steel-Line SD800 and other Steel-Line Garage Door Openers, including:
| Sectional Doors | SD800 |
| SD1200 |
| SPRINT800SD |
| SPRINT1200SD |
| Roller Doors | RD800 |
| RD1200 |
| SPRINT800RD |
| SPRINT800RD |
| RD1A |
Steel-Line ZT-07 Compatible Remote – Genuine Replacement for Steel-Line SD800
Looking for a reliable replacement for your Steel-Line SD800 Remote? The Steel-Line ZT-07 Compatible Remote is a high-quality, alternative designed to seamlessly operate with a range of Steel-Line and compatible garage door openers.
Why Choose This Remote?
Perfect Replacement for Your Steel-Line SD800 Remote – Ensures seamless operation without compatibility issues
Secure & Reliable – The rolling code technology prevents code grabbing, keeping your garage safe
Easy to Program – Simple step-by-step instructions for hassle-free setup
Free Standard Delivery Australia-Wide*
Backed by a 2-Year Manufacturer’s Warranty*
Upgrade your garage door remote today with the Steel-Line ZT-07 Compatible Remote – your trusted solution for secure and effortless access.
Programming to the Steel Line SD800 and SD1200
- Press and Hold “P” and “+” buttons until all lights turn on and the LED #7 flashes
- Press the “+” button once (all LED lights turn off except LED #7)
- Quickly press and release the required push button on your remote twice (all LED lights turn on and LED #7 will begin
- flashing)
- Press the “P” button once to save (LED 3 will switch on indicating that the remote has been successfully programmed).
- Repeat above procedure for all additional handsets
Note: Most of these openers have 10 positions in the memory. When you attempt to program another remote when your memory is full it will replace the position of the first remote programmed. Some of the earlier models only have 6 positions in the memory.
Clearing the Memory on the SD800/SD1200
This procedure will clear all programmed remotes, wireless wall buttons and wireless keypads from your opener.
- Press and Hold the “P” and “+” buttons until all lights turn on and LED 7 flashes.
- Press and Hold the “-“ button until LED 7 turns off and begins flashing again.
- Press the “P” Button once to save (LED 3 will switch on indicating that all codes have been deleted)
Programming to the Steel Line RD800 and RD1200
- Press the “LEARN” button once (LEARN LED will turn on and unit will beep 3 times)
- Within 10 seconds, press and release the button on your NEW remote once.
- All LED’s will switch off
- Motor will automatically leave Learning mode after 10 seconds with no activity.
Note: Most of these openers have 15 positions in the memory. You will need to follow the delete remotes procedure to clear the memory and start again.
Clearing the Memory on the RD800/RD1200
This procedure will clear all programmed remotes, wireless wall buttons and wireless keypads from your opener.
- Press and hold the “LEARN” button for seven (7) seconds; Learn LED will turn on with three beeps, unit will beep another two times followed by one long beep).
- All LED”s will switch off indicating that memory has been cleared.
Frequently Asked Questions: My SD800 Remote Has Suddenly Stopped Working. What Can I Do?
If your Steel-Line SD800 Remote was working fine one day but has suddenly stopped functioning—along with other remotes—you may be experiencing interference issues or a receiver failure.
Troubleshooting Steps:
Check for Interference:
- If the remote only works at very close range, radio frequency interference could be the issue.
- Try moving closer to the motor and testing the remote. If the remotes work at a low range you likely have some frequency interferences.
Test the Batteries:
- Ensure the LED indicator light on your remote flashes when you press a button.
- If there’s no light, replace the battery and test again.
Check Multiple Devices:
- These openers usually come with two remotes and a wireless wall button.
- If all devices stop working at once, it’s likely a receiver issue.
Reset the Receiver & Reprogram Remotes:
- Clear the receiver’s memory by following the motor’s reset procedure.
- Attempt to reprogram your remotes following the manufacturer’s instructions.
- If reprogramming fails, the built-in receiver may no longer be functioning.
What If the Receiver Has Failed?
If your receiver has stopped picking up signals and won’t accept new remote pairings, the best solution is to install a standalone receiver. You can contact a garage door installer in your area to fit a new receiver, allowing you to continue using compatible remotes.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.