Features:

• Genuine Merlin Garage Door Remote: Fully authentic and compatible for seamless integration with Merlin garage door systems.
• Dual Security Compatibility: Supports Merlin Security+ and Security+ 2.0 on a single device for flexible security options.
• Enhanced Security: Rolling code technology prevents code cloning, ensuring secure access to your garage.
• Multi-Door Control: Manage up to four Merlin garage doors or gates with a single remote.
• Extended Range: Operate your Merlin garage door from a distance with its reliable long-range frequency.
• User-Friendly Design: LED light indicates button press, and the remote includes a keyring attachment for convenience.
• Free Shipping & Warranty: Enjoy free shipping and a 2-year manufacturer’s warranty for added peace of mind.

Includes:

• Brand New Genuine Merlin Remote
• CR2032 Lithium Battery (pre-installed)
• Keyring Attachment
• Easy-to-Follow Coding Instructions

Compatibility:

This remote is compatible with a wide range of Merlin garage door openers, including:

• Commander Series: Commander Essential (MS65MYQ), Commander Elite (MS105MYQ), Commander Extreme (MS125MYQ), Commander Ultimate (MJ3800MYQ)
• SilentDrive™ Series: SilentDrive Essential (MR655MYQ), SilentDrive Elite (MR855MYQ)
• Other Models: WhisperDrive, TiltMaster, PowerAce, CyclonePro, OverDrive

It also works seamlessly with genuine Merlin receivers such as the E8003M Tri-Channel Receiver, E860 Weatherproof Receiver, and CM8002ANZ, as well as genuine Merlin wall button remotes like CM128, E128M, E138M, and E148M.  The Merlin receivers were also built in to some Steel Line motors – ST50-EVO.

If you are currently using one of the below remotes this remote is compatible with your opener.

• Merlin C945
• Merlin C943
• Merlin CM842/4
• Merlin E945M
• Merlin E950M
• Merlin E960M
• Merlin E970M
• Merlin E943M

Frequently Asked Questions

What is the difference between the Merlin E970M remote and other Merlin garage door remotes?

The Merlin E970M remote is a versatile remote that supports both Security+ and Security+ 2.0, making it compatible with a wide range of older and newer Merlin garage door openers. It also features advanced rolling code technology for enhanced security.  The other compatible remotes are the Merlin E960M, E980M, E964M.  They are compatible with the older version E945M and C945M remotes.

Can I use the Merlin E970M remote with multiple garage doors?

Yes, the Merlin E970M remote can be programmed to control up to four different Merlin garage door openers (see compatible list), making it ideal for homes with multiple garage doors.

How do I program my Merlin E970M remote to my garage door opener?

The Merlin E970M remote comes with easy-to-follow coding instructions.

Is the Merlin E970M remote compatible with older Merlin garage door openers?

Yes, the Merlin E970M remote is compatible with older Merlin models that use Security+ technology, as well as the latest Security+ 2.0 models.  It is however not compatible with earlier models such as the Merlin 842M and Merlin Blue Series.

What should I do if my Merlin E970M remote stops working?

First, check the battery and replace it if necessary. If the problem persists, try reprogramming the remote to your garage door opener. If you continue to experience issues, refer to the warranty and contact Merlin customer support.

By choosing the Merlin E970M remote, you’re ensuring a reliable and secure solution for your garage door control needs.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Merlin E970M Programming Instructions

The Merlin E970M Remote is versatile, allowing programming for both Merlin Security+ and Security+ 2.0 codes. With four available buttons, any button can be programmed for either code.

Preparation:

• Locate the LEARN button on your garage door opener.
• Identify the button on the remote you wish to program. Make sure not to select a button already in use.

For Merlin 2.0+ Series (Preset for Security+ 2.0):

If you are using an EVO model with Security+ 2.0, the remote is preset for this system.

To program:

1. Initiate Programming:
   • Press and hold the button on the remote you wish to use.
   • Press and release the LEARN button on the garage door opener.
2. Confirm Code Learning:
   • Release the remote button when the opener light flashes, confirming the code has been learned.
   • Test the remote by pressing the programmed button; it should activate the door.

Note: If you are unsure of the previously set code, try the Security+ programming sequence outlined below.

For Merlin+ Series (Security+ Programming Sequence):

For older Merlin+ systems, follow these steps to program:

1. Enter Programming Mode on the Remote:
   • Press and hold the left and right buttons on the remote simultaneously for about 5 seconds.
   • Release when the LED on the remote remains continuously ON.
2. Program the Remote:
   • Briefly press and release the LEARN button on your garage door opener.
   • Within 30 seconds, press the button on the remote that you wish to program.
3. Confirm Code Learning:
   • If the opener light flashes, the code has been learned. If it doesn’t flash, press the selected button again until the light flashes.
4. Lock in the Code:
   • Press any one of the other three buttons on the remote to lock in the code. The remote LED should turn OFF.
5. Test the Remote:
   • Press the programmed button. The garage door should activate. If it doesn’t, repeat the process.

Returning to Security+ 2.0:

• To switch back to Security+ 2.0 for a button, simply repeat the initial programming sequence.