Features:

• 1 x After Market Compatible Remote
• 2 Years Manufacturers Warranty*
• Free Standard Shipping Australia-Wide*

Includes:

• 1 x After Market ECA TX4 Aftermarket Remote
• 1 x Battery
• Coding Instructions
• Key Ring Attachment

Compatibility List:

• ECA TX4 

Frequency – 433.92MHz 
Coding – Rolling Code 
Body Type – Key-Ring 
Buttons – 4 
Button Colour – Chrome
Colour – Black
Range – >40 Meters

Written Instructions:

How to Install the LEXO ECA TX4 Compatible Remote via a working remote

• Take the working remote control  stand about 2m from the receiver.
• Press and hold both the buttons (III) and (I) simultaneously for 10 seconds or until the program LED turns ON (indicating Learning Mode Activated)
• Press and hold the button on the NEW remote you wish to program for 10 seconds or until the program LED turns off.

The LED light will turn off to indicate that the remote button has been learned into the receiver’s memory.

How to Install the LEXO ECA TX4 Compatible Remote via a compatible Receiver

• Remove the jumper “Teach / Clear” in the receiver and the program LED light will turn on.
• Press and release the button on the new remote control, which you would like to operate the receiver till the LED light turns off, (about two seconds).
• Return the “Teach / Clear” jumper to its place.
• Repeat steps 1- 4 for teaching more remote controls.

How to delete ALL remotes

• Disconnect the power supply from the receiver and remove the “Teach / Clear” Jumper in the receiver.
• Wait for 5 seconds and reconnect the power supply. The program LED light will turn on in the receiver.
• Return the jumper “Teach / Clear “ to its place immediately before the LED light turns off.
• The LED will flash twice to indicate that all remote controls were deleted from the receiver’s memory.

Video Instructions:

Coming Soon