Features:

• 1 x After Market Compatible Remote
• 2 Years Manufacturers Warranty*
• Free Standard Shipping Australia-Wide*

Includes:

• 1 x After Market Code Ezy Mitto Remote (see compatible list below)
• 1 x Battery
• Coding Instructions
• Key Ring Attachment

Compatibility List:

• BFT Mitto 2B
• BFT Mitto 4B
• BFT Mitto 2 Blue
• BFT Mitto 4 Blue
• BFT Mitto 2 Grey
• BFT Mitto 4 Grey
• BFT TRC 1, 2 & 4 button remotes

Technical Specifications

Frequency – 433.92MHz
Coding – Rolling Code
Body Type – Key-Ring
Buttons – 2
Button Colour – Chrome
Case – Black & Chrome
Size – 
Range – >40 Meter

Written Instructions

How to Program the LEXO BFT Mitto Aftermarket Remote via existing working remote

• Locate a remote already coded to & working the device. (Be within 3 meters of the gate control box)
• On Working Remote: Press hidden button on remote (see note below)
• On Working Remote: Momentarily press button that opens device This puts the device receiver into learning Mode
• On New Remote: Press hidden button (see note below) until remote LED lights.
• This teaches the receiver the additional code to remember

Note:  The Aftermarket version of the BFT Mitto do not have a hidden button.  The hidden function will be pressing the bottom 2 buttons together.

How to Program the LEXO BFT Mitto Aftermarket Remote via Receiver with LCD Screen

• Screen has 3 buttons to the right of the screen
• Top + / Middle – / Bottom OK
• Press OK Button twice to enter menu parameters (PArAn)
• Press – Button twice to scroll down to Radio (RADio)
• Press OK Button – Menu shows Add Start (StArt)
• Press OK Button – Menu says Hidden Button
• On New Remote – Press hidden button (See note above) – menu shows Desired Button
• Press the button you want to operate device – menu shows OK & number of remotes coded
• To exit program press buttons + & – together 3 times

Note:  You need at least one working Remote already coded.

Frequently Asked Questions: Some equipment supplied by selected stockist may be electronically programmed. The
receiver will only pair with transmitters that have been coded with this device. If you cannot code the remotes, then
they must be programmed by a qualified BFT installer using a special computer-based programming tool.

Video Instructions

Coming Soon