Features:

• Genuine Gliderol Remote
• Free Shipping Australia-Wide*
• 2 Years Manufacturers Warranty*

Includes:

• 1 x Brand New Remote
• Keyring Attachment
• 1 x Battery
• Coding Instructions

Compatibility List:

This remote is compatible with the following Openers:

• GLIDERMATIC GRD
• GLIDEROL GRD 2000
• GLIDERMATIC GTS
• GLIDEROL GTS 2000
• ROLLAMATIC GRDII

This remote is NOT compatible with

• GLIDEROL GTXU3

The TM305c has a 12v Battery & Green Circuit Board – GLIDEROL GTXU3 is in the same case, but it has a 6v Battery and a Blue Circuit Board.  They are NOT COMPATIBLE.

NOTE:

Always use BUTTON 1 to code your device – no matter which button activates it.

Written Instructions:

How to program the Gliderol TM305C to the GRD receiver

1. Carefully remove cover from control box by lifting tab at bottom
2. Press the receiver button once (located on the receiver board top left corner of control box) A red light will illuminate
3. Press large button on the handset once and hold until red-light on receiver board turns off – This confirms that the handset is programmed

How to program the Gliderol TM305C to the GTS receiver

1. Ensuring the power is switched o remove or loosen the screw on the GTS cover using screw driver
2. Remove the GTS cover by pulling in the directions of arrows as shown in the picture
3. Switch ON the power supply and press the LEARN button on receiver once (located on receiver board as shown)
4. A red light will illuminate on the receiver board Note: The receiver picture may vary depending on the model of the
   receiver compare to the picture shown in the picture
5. Press and hold large button on the handset once until red-light on receiver board turns off – This confirms that the
   handset is programmed

Video Instruction:

Coming Soon