FAAC XT2 Remote

Brand: FAAC

FAAC Logo

FAAC XT2 Remote

Brand: FAAC

FAAC Logo

Includes:

  • 1 x Genuine Remote
  • 1 x Battery
  • Coding Instructions
  • Free Shipping Australia-Wide*
  • 2 years manufacturers Warranty*

Note: This is a 433MHz remote.

$49.95

Availability:

In stock

Availability:

In stock

Includes:

  • 1 x Genuine Remote
  • 1 x Battery
  • Coding Instructions
  • Free Shipping Australia-Wide*
  • 2 years manufacturers Warranty*
Note: This is a 433MHz remote.

Features:

  • 1 x Genuine Remote
  • 2 Years Manufacturers Warranty*
  • Free Standard Shipping Australia-Wide*

Includes:

  • 1 x Brand New Remote
  • 2 x Battery
  • Coding Instructions

Compatibility List:

This remote is not compatible with any other remote.

Note:  This is a 433 MHz frequency remote.   If you have a white version of this remote you need the 868Mhz version – FAAC XT2 White.

 


WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Weight.026 kg
Brand

FAAC

MPN

433 XT2

UPC

Does not apply

Type

Colour of Buttons

Black

Number of Buttons

Remote Colour

Black

AS62368.1 Battery Compliant

Yes

Battery Technology

Lithium-Ion

Features

Genuine, Keyring, Wireless

Frequency

433.92 MHz

Items Included

Battery, Installation Instructions, Keyring Attachment, Remote

Power Source

Battery Powered

Warranty

2 Years*

Frequency433.92MHz
CodingRolling Code 
Body TypeKey-Ring
Buttons2
Button ColourBlack
Case ColourBlack
Remote SizeSize – 63x40x10mm
Range>100m
Item Contains Lithium Coin/Button BatteryNo
Battery TypeCR2032 x 2
Access TypeTool Required
AS62368.1 CompliantYes

Programming Instructions

Important information: – During programming, don’t press the keys on the new remote first, you risk deleting the old remote. – During coding the device will be activated. In this range of remotes, there are “master” remotes and “slave” remotes. “Master” remotes can share their code with other remotes and learn from other “master” remotes. “Slave” remotes cannot share their codes with another remote. To determine the type of your remote, hold down a button: – if the light flashes once then remains lit, it is a “master” remote – if the light comes on continuously without flashing, it is a “slave” remote.

CODING VIA MASTER REMOTE

  • On a flat surface, like a table, place one “master” remote that has already been coded and your new remote head to head
  • At the same time, press buttons P1 and P2 on the remote that has already been coded. Release the buttons when the light on the remote flashes.
  • Next, hold down one of the buttons on the remote that has already been coded.
  • Hold down the same button on the new remote. Wait until the light on your new remote flashes twice and then goes
  • out, indicating that the operation has been successful.
  • Release all the buttons.
  • Verify that your new remote is working.

MAKING A NEW MASTER

Coding the new remote will delete all other remotes previously programmed for your device. Once a new master has been made you can make slaves of the remaining remotes

  • Open the box containing the radio receiver.
  • At the same time, press buttons P1 and P2 on a remote that has already been coded. Release them when the light on theremote flashes.
  • On the receiver card, hold down the learning button (round button SW1) until the light on the card flashes.
  • Holding down the learning button, hold down one of the buttons on the remote, until the light on the card stays on for 2 seconds.
  • Release all the buttons.
  • Verify that your new remote is working.
  • Close the box containing the radio receiver.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features:

  • 1 x Genuine Remote
  • 2 Years Manufacturers Warranty*
  • Free Standard Shipping Australia-Wide*

Includes:

  • 1 x Brand New Remote
  • 2 x Battery
  • Coding Instructions

Compatibility List:

This remote is not compatible with any other remote.

Note:  This is a 433 MHz frequency remote.   If you have a white version of this remote you need the 868Mhz version – FAAC XT2 White.

 


WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Weight.026 kg
Brand

FAAC

MPN

433 XT2

UPC

Does not apply

Type

Colour of Buttons

Black

Number of Buttons

Remote Colour

Black

AS62368.1 Battery Compliant

Yes

Battery Technology

Lithium-Ion

Features

Genuine, Keyring, Wireless

Frequency

433.92 MHz

Items Included

Battery, Installation Instructions, Keyring Attachment, Remote

Power Source

Battery Powered

Warranty

2 Years*

Frequency433.92MHz
CodingRolling Code 
Body TypeKey-Ring
Buttons2
Button ColourBlack
Case ColourBlack
Remote SizeSize – 63x40x10mm
Range>100m
Item Contains Lithium Coin/Button BatteryNo
Battery TypeCR2032 x 2
Access TypeTool Required
AS62368.1 CompliantYes

Programming Instructions

Important information: – During programming, don’t press the keys on the new remote first, you risk deleting the old remote. – During coding the device will be activated. In this range of remotes, there are “master” remotes and “slave” remotes. “Master” remotes can share their code with other remotes and learn from other “master” remotes. “Slave” remotes cannot share their codes with another remote. To determine the type of your remote, hold down a button: – if the light flashes once then remains lit, it is a “master” remote – if the light comes on continuously without flashing, it is a “slave” remote.

CODING VIA MASTER REMOTE

  • On a flat surface, like a table, place one “master” remote that has already been coded and your new remote head to head
  • At the same time, press buttons P1 and P2 on the remote that has already been coded. Release the buttons when the light on the remote flashes.
  • Next, hold down one of the buttons on the remote that has already been coded.
  • Hold down the same button on the new remote. Wait until the light on your new remote flashes twice and then goes
  • out, indicating that the operation has been successful.
  • Release all the buttons.
  • Verify that your new remote is working.

MAKING A NEW MASTER

Coding the new remote will delete all other remotes previously programmed for your device. Once a new master has been made you can make slaves of the remaining remotes

  • Open the box containing the radio receiver.
  • At the same time, press buttons P1 and P2 on a remote that has already been coded. Release them when the light on theremote flashes.
  • On the receiver card, hold down the learning button (round button SW1) until the light on the card flashes.
  • Holding down the learning button, hold down one of the buttons on the remote, until the light on the card stays on for 2 seconds.
  • Release all the buttons.
  • Verify that your new remote is working.
  • Close the box containing the radio receiver.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.