Includes:

• Brand New Elsema FOB Remote – 1 Button Waterproof (FOB43301WP)
  • 1 x Battery (pre-installed)
  • Keyring Attachment for added convenience
• Programming Instructions for easy setup
• Free Shipping Australia-Wide*
• 2 Years Manufacturers Warranty*

Please note: Although this item is marked as in stock, our Elsema stock is consistently replenished to meet demand. Due to frequent bulk orders, stock levels can be challenging to determine in real-time. If you need an estimated time of arrival (ETA), please feel free to contact us, and we’ll be happy to assist!

Features:

• Genuine Elsema Remote with IP66 Waterproof Rating: The Elsema FOB43301WP is designed for outdoor use in tough weather conditions. With an IP66 rating, it is fully protected against dust and powerful water jets, making it ideal for wet or dusty environments.
• Durable, Compact Design with Molded Keyring Attachment: This remote features a rugged and compact design, making it both durable and portable. The molded keyring attachment ensures convenient carrying, whether it’s on your keys or in your pocket.
• Frequency Hopping Spread Spectrum (FHSS) Technology: The remote utilizes advanced Frequency Hopping Spread Spectrum (FHSS) technology, enhancing security by preventing interference and unauthorized signal duplication.
• Compatible with All Elsema Swing and Sliding Gate Motors: The FOB43301WP remote integrates seamlessly with all Elsema gate motor systems, offering reliable control for both swing and sliding gates.
• Supports PCR Penta Series Receivers: Designed for seamless compatibility, this remote works with all PCR Penta series receivers, ensuring smooth and efficient operation across various Elsema setups.

Compatible with:

• ALL Elsema Swing and Sliding Gate Motors
• PCR43301RE
• PCR43302P
• PCR43301240R
• PCR43301240RE
• PCR43302R
• PCR43302RE
• PCR43302240R
• PCR43302240RE
• PCR43304R
• PCR43304RE
• PCR43305R
• PCR43305RE
• PCR433WG
• PCTR433

The PentaFob transmitter series is available in

• 1 Button Small – FOB43301
• 1 Button Large – FOB43301L
• 2 Button – FOB43302
• 2 Button WaterProof – FOB43302WP
• 4 Button – FOB43304
• 4 Button WaterProof – FOB43304WP
• 5 Button – FOB43305
• 5 Button WaterProof – FOB43305WP
• 2 Button Handset – FOB43302H
• 1 channel Hardwired Transmitter in Enclosure – FOB43301W

The Elsema PentaFOB FOB43301WP is a premium 1-button fob remote designed to provide superior performance in outdoor and rugged environments. This waterproof remote boasts an IP66 rating, making it ideal for use in harsh weather conditions and ensuring reliable operation even in wet environments.

This fob remote is equipped with Elsema’s cutting-edge Frequency Hopping Spread Spectrum (FHSS) technology, which enhances security by transmitting encrypted codes across multiple frequencies, making it resistant to interference and signal jamming. Whether you’re using it for automatic gates, garage doors, or home automation systems, the FOB43301WP offers reliable and secure control.

Experience the advanced technology and rugged design of the Elsema Waterproof PentaFOB FOB43301WP, where simplicity meets security.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Programming Instructions for the Elsema FOB43301WP – 1 Button Waterproof Remote

PentaFOB® Programming Instructions

There are two methods to program the PentaFOB® remotes and receivers:

1. Remote to Receiver
2. Remote to Remote

Remote to Receiver Programming:

1. Ensure that all switches on the receiver’s 12-way dip switch are set to “OFF.”
2. Press and hold the program button on the receiver.
3. While holding the program button, press the button on the remote for 2 seconds. The receiver’s LED will flash and then turn green, indicating a successful pairing.
4. Release both the program button on the receiver and the button on the remote.
5. Test the connection by pressing the remote button to check the receiver’s output.

Remote to Remote Programming (Ensure you are near the receiver for this process):

1. Open the case of a remote that is already programmed and locate the program button on the back of the board. Press and release this button to put the receiver into learning mode.
2. Press the button on the already programmed remote to activate the receiver.
3. Press the button on the new remote that needs to be programmed and hold it for 2 seconds.
4. Press the program button again on the already programmed remote to exit the receiver’s learning mode.
5. Test the newly programmed remote by pressing its button to verify the receiver’s output.

ELSEMA PENTAFOB 1 BUTTON REMOTE – CODING INSTRUCTIONS