Includes:

• 1 x Brand New Elsema Pentacode Transmitter with External inputs
• Programming Instructions
• Pluggable Terminal Blocks
• Micro Antenna for Short-Range Applications
• Free Shipping Australia-Wide*
• 2-Year Manufacturer’s Warranty*

Please note: Although this item is marked as in stock, our Elsema stock is consistently replenished to meet demand. Due to frequent bulk orders, stock levels can be challenging to determine in real-time. If you need an estimated time of arrival (ETA), please feel free to contact us, and we'll be happy to assist!

Features:

• Four External Inputs: Supports four voltage-free inputs for versatile control options.
• Frequency Hopping Technology: Provides interference-free communication by hopping across multiple frequencies.
• Power Supply Flexibility: Operates on 12 to 24 Volts AC/DC or a 12V battery.
• Easy Coding: Dual coding system with 12-way dip switch or encrypted coding for maximum security.
• Long-Range Operation: Capable of transmitting up to 500 meters when used with the ANT433M antenna.
• User-Selectable Transmitter Modes: Multiple transmission modes, including continuous transmission, off-delay, and burst transmission.

Applications:

• Wireless Push Button Systems
• Industrial Controls
• Duress and Security Systems
• PLC-Controlled Transmitters
• Reducing the Need for Long Control Wires

Compatible with:

• PCR43301RE
• PCR43302P
• PCR43301240R
• PCR43301240RE
• PCR43302R
• PCR43302RE
• PCR43302240R
• PCR43302240RE
• PCR43304R
• PCR43304RE
• PCR43305R
• PCR43305RE

Note:  Not compatible with Elsema Control Boards and Elsema Sliding or Swing Gate Motors without the addition of one of the above receivers. 

The Elsema Pentacode Transmitter with External inputs PCK43304W transmitter is a powerful and versatile solution designed for controlling automated systems with ease. Equipped with four external inputs, this transmitter allows for multiple control functions, making it ideal for a wide range of applications, including wireless push buttons, industrial controls, duress buttons, and security systems. The PCK43304W features frequency hopping technology, ensuring secure, interference-free communication with Elsema PCR series receivers, even in areas with multiple systems operating nearby.

This transmitter supports a 12 to 24 Volt AC/DC power supply or a 12V battery, giving you flexibility in powering the device. The PCK43304W offers dual coding capabilities, allowing you to use the traditional 12-way dip switch coding or the advanced encrypted coding system with over 17 billion possible combinations for enhanced security.

Built for long-range operation, the PCK43304W can reach up to 500 metres when paired with an external antenna like the ANT433M. Its durable design, compact size, and user-friendly setup make it the perfect choice for controlling devices over long distances without the need for cumbersome control wires.

Frequently Asked Questions:

What is the Elsema PCK43304W Transmitter used for?

The PCK43304W Transmitter is used for controlling automated systems like gates, industrial machinery, duress buttons, and security systems. It features four external inputs, making it ideal for wireless push button systems and other long-range control applications.

What is Frequency Hopping Technology?

Frequency Hopping Technology transmits the control signals across multiple frequencies, reducing the risk of interference or jamming. This ensures stable and secure communication even in environments with multiple wireless systems.

How far can the PCK43304W Transmitter operate?

When paired with the ANT433M antenna, the PCK43304W can transmit up to 500 metres, making it suitable for long-distance control applications.

What are the power supply options for the PCK43304W?

The transmitter can be powered by either a 12 to 24 Volt AC/DC supply or a 12V battery, giving you flexibility in installation.

What coding options are available for this transmitter?

The PCK43304W supports dual coding. You can use the traditional 12-way dip switch or the advanced encrypted coding system with over 17 billion combinations for enhanced security.

What types of inputs does the PCK43304W support?

The transmitter has four voltage-free external inputs, allowing it to control multiple devices or systems simultaneously.

Can I use the Elsema Pentacode Transmitter with External inputs PCK43304W for continuous transmission?

Yes, the PCK43304W has a continuous transmission mode that sends signals as long as at least one input is activated. This ensures ongoing control for as long as necessary, with a five-minute limit to comply with local radio regulations.

What are the available transmission modes?

The PCK43304W offers three transmission modes:

• Off Delay: Transmits a 1.5-second burst and pauses for a user-set delay (2-62 seconds).
• Continuous Transmission: Transmits continuously while an input is active.
• One Burst Transmission: Sends a single burst of signal and then enters standby mode.

Programming Instructions for the Elsema PCK43304W Transmitter

12-Way Dip Switch Coding

1. Set the Receiver’s Code: On the receiver, set a random code by adjusting the 12-way dip switches to “On” or “Off.”
   

   Important: Do not use the default factory setting as it is a common code used by others.

2. Open the Transmitter: Remove the cover of the PentaCODE® transmitter.
3. Match the Dip Switches: Set the transmitter’s 12-way dip switch to match the receiver’s 12-way dip switch.
4. Activate Channel 1: Activate channel 1 on the transmitter. The receiver’s output should respond, and the LED on the receiver will light up to confirm successful activation.
5. Programming Channels 2, 3, and 4: To program channels 2, 3, or 4 on the transmitter to different receivers:
   • Change dip switches 11 and 12 on each receiver according to the following table:

   Receiver	Dip Switch 11	Dip Switch 12
   1	Off	Off
   2	On	Off
   3	Off	On
   4	On	On

   Note: Dip switches 1 to 10 should be identical across all transmitters and receivers.

Encrypted Coding (All 12-Way Dip Switches must be “Off”)

1. Receiver to Transmitter Programming

1. Press and hold program button 1 on the receiver.
2. Activate channel 1 of the transmitter for 2 seconds. The receiver’s LED will flash green.
3. Deactivate channel 1 on the transmitter and release the receiver’s program button.
4. The LED on the transmitter will flash to confirm successful coding.

2. Transmitter to Receiver / Transmitter to Transmitter Programming

• Broadcast the Transmitter’s Code:
  1. Ensure all 12 dip switches on the transmitter are “Off.”
  2. Activate channel 1, then toggle dip switch 12 to “On” and then back to “Off.”
  3. The LED will remain on for 10 seconds to confirm the transmitter is broadcasting its code.
• Broadcast the Receiver’s Code:
  1. Ensure all 12 dip switches on the receiver are “Off.”
  2. Toggle dip switch 12 to “On” and then back to “Off.”
  3. The green LED will stay on for 10 seconds to confirm the receiver is broadcasting its code.
• Programming the Second Unit:
  1. While the code is broadcasting, activate channel 1 on the second transmitter or receiver for 1 second, then release the input.
  2. The LED will flash twice to confirm successful programming.
  3. Broadcasting will stop automatically after 10 seconds or when any dip switch is turned on.

Deleting Receiver’s Memory

1. Locate the CC pin on the receiver.
2. Short the pin for 10 seconds. This will delete all programmed transmitters from the receiver’s memory.