Features:

• 1 x After Market Compatible Remote
• 2 Years Manufacturers Warranty*
• Free Standard Shipping Australia-Wide*

Includes:

• 1 x Centsys Nova Aftermarket Remote
• 1 x Battery
• Coding Instructions
• Key Ring Attachment

Compatibility List:

• Centsys NOVA remote

Aftermarket Version of Centsys Nova Remote

Frequency – 433.92MHz
Coding – Rolling Code
Body Type – Key-Ring
Buttons – 4
Button Colour – Chrome
Case Colour – Black and Chrome
Range – > 40 meters

Written Instructions:

How to Program the Code Ezy Star – Centsys Nova Aftermarket remote to a compatible receiver.

• Open the Receiver Unit, with POWER ON, bridge the LEARN jumper – Red LED will now illuminate
• Press the required button on your NEW remote – Red LED will flash once – confirming button learnt
• Repeat step 2 to program additional button
• Once finished, remove the bridge from the LEARN jumper.

Wait 10 seconds then press the NEW remote to confirm it has coded.

How to Delete ALL remotes via a compatible receiver

• Link Jumper J1 or J2
• Red LED will flash 11 times then Red LED will remain on.
• Remove the link to completely erase the memory

How to Program the Code Ezy Star – Centsys Nova Aftermarket remote to a Voyager Receiver

• Press any button on your MASTER remote –
• Red LED needs to flash at least 10 times (or 10 seconds) –  DO NOT EXCEED 20 SECONDS.
• Red LED should stay illuminated during LEARN
• Press the required buttons on your NEW remote.
• Wait 10 seconds from last button pressed to deactivate LEARN mode – Red LED should turn off

How to Program the Code Ezy Star – Centsys Nova Aftermarket remote via Turbo Rotary Dials

• Using the function dial, select remotes
• On the settings dial, select
  • Tx TRG for full opening and closing or
  • TX Ped for pedestrian mode
• Press the Push Button located between the Dials and to the right
• Press the button on your NEW remote you want to activate the device.
• Reset dials to RUN

How to Program the Code Ezy Star – Centsys Nova Aftermarket remote via EVO menu

• Press Centre button for 2 seconds
• Press Bottom button to scroll down to remotes
• Press Centre button 4 times.
• Press button on NEW remote for 1 second.
• Device will beep to confirm accepted.
• Press the Round EXIT button 3 times to exit.

What to do if you have lost your Master Remote.

The Master Remote will activate the red LED on receiver when pressed. When the Master remote is pressed the red LED will activate with a long flash followed by one short flash.

To create a new master – follow instructions to erase memory and add a new MASTER.

Video Instructions:

Coming Soon