Features:

• Genuine Original Equipment Remote: This remote is an authentic replacement for your existing Boss or Steel-Line remote.
• Free Shipping Australia-Wide*: Enjoy the convenience of free shipping across Australia.
• 2 Years Manufacturers Warranty*: Rest assured with a full 2-year warranty from the manufacturer.
• Additional Accessories: The Boss HT4 2211L 2-button remote comes with a wall caddie and sun-visor clip for easy access.

Includes:

• 1 x Brand New Remote (Either a Boss or Steel-Line Genuine Remote – Model- 303RTX)
• Keyring Attachment
• 1 x Battery
• Coding Instructions
• For Boss HT4 2211L 2-Button Remote: Wall caddie and sun-visor clip included.

Compatibility:

Remotes:

• Boss HT4 2211L – Tilt, Overhead, and Panel Garage Door
• Boss HT3 Blue LED v1
• Boss HT3 Blue LED v2
• Guardian 2211L
• Guardian HT3 Blue LED
• Steel-Line 2211L 1, 2, and 4 Button – Tilt, Overhead, and Panel Garage Door
• Steel-Line HT3 Blue

Openers:

• BOL4; BOL6 and BOL9
• OL4, OL6 and OL9

Important Note: This remote is not compatible with original Steel-Line and Boss Roller Door (BRD1, BRD9)

For roller door openers, you will need to purchase a compatible generic remote.

Boss HT4 2211L Remote Replacement – Genuine Steel-Line and Boss Garage Door Remote

Upgrade or replace your garage door remote with the Boss HT4 Remote Replacement. This genuine original equipment remote is designed to seamlessly integrate with your existing Boss and Steel-Line garage door openers. Whether you need a new remote for your tilt, overhead, or panel garage door, the Boss HT4 2211L is the ideal solution. This model includes advanced features like a wall caddie and sun-visor clip, making it a convenient and versatile choice.

How to Access the Receiver in a Roller Door Opener:

1. Remove the Face Plate: Insert a screwdriver into the slot located on the bottom side of the face plate and gently pry it off.
2. Locate the “Radio Set” Button: The “Radio Set” button is situated under the large AQUA Open/Close button.
3. Activate the Unit: Ensure the power is turned on. Then, press and release the small “Radio Set” button.
4. Ready for Coding: The yellow LED will illuminate, indicating that your unit is ready to accept a new code.

How to Access the Receiver in an Overhead Opener:

1. Locate the “Radio Set” Button: To the left of the four adjustment buttons, you will find a recessed button marked “Radio Set.”
2. Activate the Unit: Using a pointed object, momentarily press the “Radio Set” button.
   • If the courtesy light is off, it will turn on and stay on for 30 seconds.
   • If the courtesy light is already on, it will flash once and then stay on for 30 seconds, indicating that your unit is ready to accept a new code.

How to Program the Boss HT4 2211L Remote to the Opener:

1. Select the Button: Press the button on the remote that you want to use to operate your device.
2. Code Acceptance: If the code is accepted, the green LED or courtesy light will blink twice.
3. Programming Multiple Remotes: If you need to program additional remotes, code them at this stage.
4. Finalising the Setup:
   • Overhead Panel Lift/Tilt Operator: The unit will reset automatically after coding.
   • Roller Door Operator: After coding, press and release the small “Radio Set” button. The yellow LED will indicate the reset is complete, and the handset is now programmed and ready for use.

How to Delete All Transmitters from Memory:

1. Roller Door Operator:
   • Turn off the power to the unit.
   • Press and HOLD down the “Radio Set” button while turning the power back on.
   • The three LEDs will flash twice, indicating that all codes have been deleted from the memory.
2. Overhead Panel Lift/Tilt Operator:
   • Press and hold the “Radio Set” button for 5 seconds.
   • The courtesy light will flash seven times, indicating that all transmitters have been cleared from the memory.

Instructional Video – Setting up the OL4 Sectional garage door operator