THIS ITEM HAS BEEN DISCONTINUED BY MANUFACTURER.

You can still purchased compatible remotes below:

• Genuine Replacement:  B&D TB7 Remote
• Generic Replacement:  Code Ezy – Ajax

Features:

• Genuine original equipment remote
• Free Shipping Australia-Wide*
• 2 Years Manufacturers Warranty*

Includes:

• 1 x Brand New Remote
• Keyring Attachment
• 1 x Battery
• Coding Instructions

Compatibility List:

Remotes:

• B&D TB7
• B&D TB6
• B&D Tri Tran v1 
• B&D Tri Tran v2
• B&D Tri Tran Mini

Warning: 128 Bit remotes code to 64 Bit openers, but 64 Bit remotes will not code to 128 Bit gate & garage openers. 

The older version B&D openers with 64 Bit (Tri Tran v1, v2 and Mini) are compatible with the B&D Garage door remote – TB5 and TB6 but the 64 Bit B&D garage remotes (Tri Tran v1, v2 and Mini) are not compatible with the newer version 128 Bit openers (using TB6 and TB5).  This means that if you upgrade your 64 Bit opener to a new 128 Bit opener your older remotes will not work along side the new remotes.

This PREMIUM quality remote replaces the classic version 1&2  B&D TRI-TRAN.  It features 4 black buttons in a round configuration for ease of use and has a metal back bone. A built in key-ring connection makes attachment easy and the well rounded edges gives the remote an exciting modern look. 

TECH SPECS FOR THE B&D TB5 TRI-TRAN REMOTE

Written Instructions

How to program the B&D TB5 remote 

• Press the CODE SET button and release.
• The CODE SET LED will illuminate to indicate the opener is in Code Learn mode.  If a valid code is not stored within 15 seconds the opener will exit this mode.
• Press the button on the NEW remote you want to activate the opener.
• The CODE SET LED will begin to flash
• Press the same button on the NEW remote
• THE CODE SET LED will illuminate for one seconds and then go out.

Follow the above instructions for every button you wish to activate the opener.

Note: Up to fourteen (14) codes can be stored in the receiver’s memory.

How to Program the Light to your B&D Remote

Although the courtesy light comes on with each operation of the opener, it may also be controlled by a transmitter without operating the door.

• Press the CODE SET button twice.
• The CODE SET LED will illuminate and the courtesy light will turn on to indicate that the light code learning is active.
• Choose a button on the NEW remote not already coded into the receiver.
• Press this button and the CODE SET LED will begin to flash.
• Press the same remote button again.
• The CODE SET LED will illuminate for one second and then go out.

The transmitter is now coded to operate the light – press the button to test.

How to Delete the Memory from a receiver

• If the CODE SET button is pressed and held for 6 seconds the CODE SET LED will blink rapidly for one second to indicate that all codes have been erased.

B&D TRI-TRAN TB5 REMOTE – CODING INSTRUCTIONS

Video Instructions:

Coming Soon