Includes:

• Four channel receiver with relay output
• Elsema Coding Cable
• Programming Instructions
• Free Shipping Australia-Wide*
• 2 Years Manufacturers Warranty*

Please note: Although this item is marked as in stock, our Elsema stock is consistently replenished to meet demand. Due to frequent bulk orders, stock levels can be challenging to determine in real-time. If you need an estimated time of arrival (ETA), please feel free to contact us, and we'll be happy to assist!

Features:

• Four-Channel Receiver with Relay Output: Provides flexible control options, perfect for applications requiring reliable signal transmission.
• Over 4 Billion Code Combinations: Offers an exceptionally high level of security, virtually eliminating the risk of code grabbing or interference.
• Unlimited Transmitter Capacity: Can store an unlimited number of transmitters, making it ideal for large-scale operations.
• User-Selectable Output Modes: Supports momentary, latching, and security latching output modes, allowing customisation to suit different operational needs.
• Versatile Power Supply: Compatible with both 12 – 24 Volts AC or DC, offering flexibility in installation and application.
• Highly Sensitive Receiver Input Stage: Ensures reliable performance with an operating range of up to 350 meters when paired with GLT433 transmitters.
• High Load Switching Capacity: Capable of switching loads up to 8 Amps, making it suitable for heavy-duty industrial applications.
• Crystal Controlled Stability: The crystal-controlled design guarantees high stability and performance, ensuring consistent operation under varying conditions.
• Advanced Microcontroller Technology: This receiver uses re-programmable microcontroller technology, allowing it to be adapted to unique applications and providing future-proofing for evolving needs.
• Power ON LED Indicator: Easy monitoring of the receiver’s power status for quick diagnostics.

Compatible with:

• GLT43301
• GLT43302
• GLT43304
• GLT43308
• ANT433 LP (Antenna)
• ANT433 S (Antenna)
• ANT433 M (Antenna)

The Elsema GLR43304R Receiver is a highly versatile 4-channel Gigalink® receiver, perfect for upgrading older gate or garage door openers to work with new series remotes, or for use in industrial applications. This receiver is commonly used for automating systems like spray reels, concrete trucks, and other industrial equipment. The receiver wires directly into your existing system using a standard 2-core wire, allowing for seamless integration with nearly any setup. With an impressive range of up to 400 meters, it enables remote control of devices using a standard 12/24V power input.

The GLR43304R supports Momentary, Latching, and Security Latching output modes, offering flexibility in operation. It can store an unlimited number of transmitters, allowing you to easily add new remotes without interfering with existing ones. The receiver’s robust design includes four relay outputs that can handle up to 8 Amps each, making it ideal for industrial automation, crane control, winches, and more. The on-board LED indicators and easy programming options ensure smooth installation and operation.

Frequently Asked Questions:

What is the operating range of the Elsema GLR43304R receiver?

The operating range of the GLR43304R can reach up to 350 meters when used with compatible GLT433 transmitters, making it suitable for both residential and industrial applications.

How many transmitters can the GLR43304R store?

The receiver can store an unlimited number of transmitters, providing flexibility for systems requiring multiple users.

What are the power supply requirements for the Elsema Gigalink GLR43304R?

The GLR43304R operates on a power supply range of 12 to 24 Volts AC or DC, ensuring compatibility with various setups.

What output modes does the GLR43304R support?

The GLR43304R supports momentary, latching, and security latching output modes, which can be selected by the user depending on the application.

What applications is the GLR43304R suitable for?

This receiver is ideal for a range of applications including automatic gates, security systems, crane control, and other industrial automation tasks that require reliable on/off functionality.

Is the GLR43304R receiver suitable for industrial use?

Yes, the GLR43304R is highly suited for industrial applications, thanks to its robust design, high load switching capacity, and customisable output modes.

Does the Elsema GLR43304R offer high security?

The receiver features over 4 billion code combinations and utilises encrypted 32-bit digital codes, providing a high level of security and reducing the risk of interference or unauthorised access.

Programming Instructions for the Elsema GLR43304 – 4 Channel Receiver

The Elsema GLR43304 4-channel receiver can be programmed in both multi-channel and single-channel modes. Follow the steps below for programming the receiver with a transmitter.

Multi-Channel Programming

Multi-channel programming allows you to program all channels of the receiver to the transmitter at once.

Steps for Multi-Channel Programming:

1. Power Up the Receiver:
   Connect power to the GIGALINK™ receiver. Ensure that all the switches on the mode dipswitch are turned off.
2. Set Random Code (Optional):
   Momentarily short the two CC pins on the receiver board. This sets all the channels to a random code.
   Note: If you short the CC pins, any previously programmed transmitters will be erased. Do not perform this step if you wish to keep previously programmed transmitters.
3. Connect the Transmitter to the Receiver:
   Insert the GIGALINK™ cable into the 2.5-mm coding socket of both the transmitter and the receiver. This will activate the programming mode, indicated by the red LED on the transmitter lighting up.
4. Program the Transmitter:
   Press any two buttons on the multi-channel transmitter simultaneously for approximately one second. The LED on the transmitter should blink twice to confirm successful code programming, then turn off.
5. Disconnect the GIGALINK™ Cable:
   Once programming is confirmed, remove the GIGALINK™ cable.
6. Repeat for Additional Transmitters:
   To program another multi-channel transmitter, repeat steps 3 to 5.
   Important: If you’re programming additional transmitters, do not short the CC pins again, as this will delete all previously programmed transmitters.

Single Channel Programming

Single-channel programming allows you to program one channel at a time.

Steps for Single-Channel Programming:

1. Power Up the Receiver:
   Connect power to the GIGALINK™ receiver. Ensure that all the switches on the mode dipswitch are turned off.
2. Set Random Code (Optional):
   Momentarily short the two CC pins on the receiver board to set all channels to a random code.
   Note: If you wish to keep existing transmitters, skip this step as it will erase previously programmed transmitters.
3. Select Receiver Channel:
   Use the 4-way dipswitch to select which receiver channel to program. Refer to the table below for dipswitch settings:

   Dipswitch Setting	Receiver Channel (Output Relay)
   Off, Off, Off, Off	Channel 1 (GLR43303, GLR43304, GLR2703, GLR2704)
   On, Off, Off, Off	Channel 2 (GLR43303, GLR43304, GLR2703, GLR2704)
   Off, On, Off, Off	Channel 3 (GLR43303, GLR43304, GLR2703, GLR2704)
   On, On, Off, Off	Channel 4 (GLR43304, GLR2704)

4. Connect the Transmitter to the Receiver:
   Insert the GIGALINK™ cable into the 2.5-mm coding socket of both the transmitter and the receiver. This will activate the programming mode, indicated by the red LED on the transmitter lighting up.
5. Program the Transmitter:
   Press the selected button on the transmitter for approximately one second. The LED should blink twice to confirm successful code programming, then turn off.
6. Disconnect the GIGALINK™ Cable:
   Once programming is confirmed, remove the GIGALINK™ cable.
7. Repeat for Additional Channels:
   To program another channel, repeat steps 3 to 6.
   Important: Do not short the CC pins again when programming additional transmitters, as this will delete all previously programmed transmitters.

Forward Programming

Forward programming allows the transmitter’s code to be transferred to multiple receivers, enabling simultaneous activation of multiple receivers.

Steps for Forward Programming:

1. Power Up Both the Receiver and Transmitter:
   Ensure both the receiver and the transmitter are powered on.
2. Jumper the CC Pins:
   Place a jumper across the CC pins on the receiver.
3. Connect the Transmitter to the Receiver:
   Use the GIGALINK™ coding cable to connect the transmitter and the receiver.
4. Program the Transmitter:
   Press the desired button on the transmitter for 2 seconds. This will transfer the code to the receiver.
5. Remove the GIGALINK™ Cable:
   After the code is programmed, disconnect the GIGALINK™ cable.
6. Remove the Jumper:
   Remove the jumper from the CC pins to complete the programming process.
7. Repeat for Additional Receivers:
   Follow the same steps to program additional receivers with the same transmitter code.

Technical Support

Receiver not responding to transmitter after programming

Try to program the transmitter again, but this time with the battery connected to the transmitter. Check if GIGALINK™ cable is inserted correctly

Transmitter activates wrong channel on a multi-channel receiver.

Wrong dipswitch setting while programming the receiver. Use the dipswitch table and program again

Transmitter has short range

Check receiver antenna connection. If you are using a shielded coax cable, check that the shield is connected to the negative and the coaxial core to the antenna terminal.

LED is flashing on the transmitter

Flat Battery, replace battery

Click HERE for Manual