Includes:

• Two channel receiver with relay output
• Elsema Coding Cable
• Programming Instructions
• Free Shipping Australia-Wide*
• 2 Years Manufacturers Warranty*

Please note: Although this item is marked as in stock, our Elsema stock is consistently replenished to meet demand. Due to frequent bulk orders, stock levels can be challenging to determine in real-time. If you need an estimated time of arrival (ETA), please feel free to contact us, and we’ll be happy to assist!

Features:

• Two-Channel Receiver with Relay Output: Provides flexible control options, perfect for applications requiring reliable signal transmission.
• Over 4 Billion Code Combinations: Offers an exceptionally high level of security, virtually eliminating the risk of code grabbing or interference.
• Unlimited Transmitter Capacity: Can store an unlimited number of transmitters, making it ideal for large-scale operations.
• User-Selectable Output Modes: Supports momentary, latching, and security latching output modes, allowing customisation to suit different operational needs.
• Versatile Power Supply: Compatible with both 12 – 24 Volts AC or DC, offering flexibility in installation and application.
• Highly Sensitive Receiver Input Stage: Ensures reliable performance with an operating range of up to 350 meters when paired with GLT433 transmitters.
• High Load Switching Capacity: Capable of switching loads up to 8 Amps, making it suitable for heavy-duty industrial applications.
• Crystal Controlled Stability: The crystal-controlled design guarantees high stability and performance, ensuring consistent operation under varying conditions.
• Advanced Microcontroller Technology: This receiver uses re-programmable microcontroller technology, allowing it to be adapted to unique applications and providing future-proofing for evolving needs.
• Power ON LED Indicator: Easy monitoring of the receiver’s power status for quick diagnostics.

Compatible with:

• GLT43301
• GLT43302
• GLT43304
• GLT43308
• ANT433 LP (Antenna)
• ANT433 S (Antenna)
• ANT433 M (Antenna)

Programming Instructions for the Elsema GLR43302 – 2 Channel Receiver

The Elsema GLR43302 receiver allows for both multi-channel and single-channel programming. Below are the steps for setting up and programming the receiver.

Multi-Channel Programming

Multi-channel programming allows you to program all channels of a multi-channel receiver to a multi-channel transmitter.

Steps:

1. Power Up the Receiver:
   Connect power to the GIGALINK™ receiver, and ensure that all switches on the mode dipswitch are turned off.
2. Set Random Code (Optional):
   Momentarily short the two CC pins on the receiver board. This sets all channels to a random code.
   Note: If you short the CC pins, any previously programmed transmitters will be erased, and they will need to be reprogrammed. If you wish to keep the existing transmitters, skip this step.
3. Connect the Transmitter to the Receiver:
   Insert the GIGALINK™ cable into the 2.5-mm coding socket of both the transmitter and the receiver. This will activate the programming mode, indicated by the red LED on the transmitter lighting up.
4. Program the Transmitter:
   Press any two channels simultaneously on the transmitter for approximately 1 second. The LED on the transmitter should blink twice to confirm successful code programming, then turn off.
5. Disconnect the GIGALINK™ Cable:
   Once programming is confirmed, remove the GIGALINK™ cable.
6. Repeat for Additional Transmitters:
   To program another multi-channel transmitter, repeat steps 3 to 5.
   Important: If you’re programming additional transmitters, do not short the CC pins again, as this will delete all previously programmed transmitters.

Single Channel Programming

Single-channel programming allows you to program one channel at a time to the transmitter.

Steps:

1. Power Up the Receiver:
   Connect power to the GIGALINK™ receiver, and ensure that all switches on the mode dipswitch are turned off.
2. Set Random Code (Optional):
   Momentarily short the two CC pins on the receiver board to set all channels to a random code.
   Note: If you wish to keep existing transmitters, skip this step as it will erase previously programmed transmitters.
3. Select Receiver Channel:
   Set the 2-way dipswitch to select the channel to be programmed.
   Refer to the dipswitch settings below:

   Dipswitch Setting	Receiver Channel (Output Relay)
   Off, Off	Channel 1 (GLR43302/GLR2702)
   On, Off	Channel 2 (GLR43302/GLR2702)

4. Connect Transmitter to Receiver:
   Insert the GIGALINK™ cable into the 2.5-mm coding socket of both the transmitter and the receiver. This will activate programming mode, indicated by the red LED on the transmitter lighting up.
5. Program the Transmitter:
   Press and hold one of the selected transmitter buttons for approximately 1 second. The LED should blink twice to confirm successful programming, then turn off.
6. Disconnect the GIGALINK™ Cable:
   Once programming is confirmed, remove the GIGALINK™ cable.
7. Repeat for Additional Channels:
   To program another transmitter channel, repeat steps 3 to 6.
   Important: Do not short the CC pins again, as this will delete all previously programmed transmitters.

Forward Programming

Forward programming allows you to program the transmitter code into multiple GIGALINK™ receivers, enabling the transmitter to activate several receivers simultaneously.

Steps for Forward Programming:

1. Power Up the Receiver and Transmitter:
   Ensure that both the receiver and the transmitter are powered on.
2. Jumper the CC Pins:
   Place a jumper across the CC pins on the receiver.
3. Connect the Transmitter and Receiver:
   Use the coding cable to connect the transmitter and receiver.
4. Program the Transmitter:
   Press the desired button on the transmitter for 2 seconds. This will transfer the code from the transmitter to the receiver.
5. Remove the Coding Cable:
   After the code is programmed, disconnect the coding cable.
6. Remove the Jumper:
   Remove the jumper from the CC pins to complete the programming process.
7. Repeat for Additional Receivers:
   Follow the same steps to program more receivers with the same transmitter code.

Technical Support

Receiver not responding to transmitter after programming

Try to program the transmitter again, but this time with the battery connected to the transmitter. Check if GIGALINK™ cable is inserted correctly

Transmitter activates wrong channel on a multi-channel receiver.

Wrong dipswitch setting while programming the receiver. Use the dipswitch table and program again

Transmitter has short range

Check receiver antenna connection. If you are using a shielded coax cable, check that the shield is connected to the negative and the coaxial core to the antenna terminal.

LED is flashing on the transmitter

Flat Battery, replace battery

Click HERE for Manual