Includes:

• 1 x Genuine Elsema FOB43301W Hardwired Transmitter
• Programming Instructions
• Screw Type Terminal Block for Easy Connections
• Free Shipping Australia-Wide*
• 2 Years Manufacturers Warranty*

Please note: Batteries (2 x AAA) are not included.

• Genuine Elsema Transmitter: Designed and manufactured with quality and reliability in mind.
• Small Form Factor: Compact design for installation in tight or concealed spaces.
• 100m Line of Sight Operation: Operates effectively over a long range without signal drop.
• Multi-Frequency Hopping Technology: Eliminates interference by hopping across five frequencies.
• 2 x AAA Battery Operated: Easy to power and maintain with standard batteries (not included)
• Input Flexibility: Compatible with both Normally Open (NO) and Normally Closed (NC) switches.

Applications:

• Wireless push buttons
• Industrial controls
• Duress and security buttons
• PLC-controlled systems
• Reducing the need for control wiring

Compatibility:

The Elsema FOB43301W hardwired transmitter works with all Elsema Penta receivers when used in the PentaFOB function with all dipswitches turned off, including:

• PCR43301RE
• PCR43302R
• PCR43302RE
• PCR43302P
• PCR43304R
• PCR43304RE
• PCR43305R
• PCR43305RE

The Elsema FOB43301W Hardwired Transmitter is a compact and versatile solution designed for reliable wireless communication in a wide range of applications. Powered by two AAA batteries, this hardwired transmitter offers flexibility with its small form factor, making it ideal for installations in confined spaces or within walls. Its robust construction and advanced frequency hopping technology ensure seamless operation in industrial controls, duress systems, and security applications, without interference from nearby systems.

With an operating range of up to 100 meters, the Elsema FOB43301W hardwired transmitter is compatible with all Elsema Penta series receivers, providing flexibility and reliable performance in various environments. This transmitter is designed for easy integration, accepting inputs from either Normally Open (NO) or Normally Closed (NC) switches. It is an excellent choice for reducing the need for hardwiring in control systems.

Engineered in Australia for the local conditions and manufactured in Fiji, this genuine Elsema product offers reliable performance and is backed by a 2-year manufacturer’s warranty.

Programming Instructions for the Elsema FOB43301W Hardwired Transmitter

To Program the Elsema FOB43301W to a Receiver:
1. Ensure that the receiver is powered on.
2. Press and hold the **program button** on the receiver.
3. While holding the program button on the receiver, **activate the input** on the FOB43301W transmitter by pressing it for 2 seconds.
4. The receiver’s LED will begin to flash and then turn solid green, indicating a successful pairing.
5. **Deactivate the transmitter input**, then release the program button on the receiver.
6. Test the setup by activating the transmitter input again to confirm the receiver responds as expected.

To Delete All Remotes from the Receiver’s Memory:
1. Locate the **code reset pins** on the receiver.
2. Short the pins for **10 seconds**. This action will delete all remotes stored in the receiver’s memory.

Using the PentaFOB® Programmer:
The PentaFOB® Programmer allows for selective addition or deletion of remotes from the receiver’s memory. This tool is particularly useful when a remote is lost or when access needs to be restricted (e.g., if a tenant moves out).

Using PentaFOB® Backup Chips:
For receivers with hundreds of remotes programmed, the PentaFOB® Backup Chip can be used to create a backup of the receiver’s memory. This is important in cases where the receiver may be damaged, ensuring that all programmed remotes can be restored.