Features:

• 1 x After Market Compatible Remote
• 2 Years Manufacturers Warranty*
• Free Standard Shipping Australia-Wide*

Includes:

• 1 x After Market Remote
• 1 x Battery
• Coding Instructions
• Key Ring Attachment

Compatibility List:

• • Multicode 3060
  • Multicode 3083
  • Multicode 3089
  • Multicode 4020
  • Multicode 4140
  • Centurion 3089
  • SteelLine HT6M
  • Linear Multicode
  • DigiCode 5040 (Backwards)
  • Digicode 5070 (Backwards)

The Multicode Remote was widely used by Steel Line, Linear and Centurion in older versions of their openers but is not compatible with their newer models.  These openers work on a 300MHz Frequency.

Technical Specifications

Frequency – 300MHz
Coding – Fixed Code
Body Type – Key-Ring
Buttons – 1
Button Colour – Red
Case Colour – Black
Range – >40 Meters

How to Program the Multicode 3060 Aftermarket Remote

This remote is defaulted to Multicode but can be used for DigiCode receivers in a reverse order.

First step is to determine whether you have a Multicode or Digicode receiver within your opener.

1. Remove the inspection panel to reveal the switch settings.

Note:  Multicode receivers were more commonly used than Digicode in Australia.

PROGRAMMING TO A MULTICODE RECEIVER

1. On your Receiver or Remote you will have a 10 dipswitches.  Duplicate this sequence exactly as shown.

UP = ON, DOWN = OFF

PROGRAMMING TO A DIGICODE RECEIVER

On your Receiver or Remote you will have a 10 dipswitches.  Use the below table to help you determine the orientation.

In Row 2 write the orientation on your receiver.   U = Up, D = Down

Ie – U D, D ,D ,U , U…….

In Row 3 write the opposite direction

Ie – D, U, U, U, D, D…….

This is the sequence to put into your new remote.